How to Paint a Ceiling the Right Way

Ceilings are the focal point of a room, so if you’re planning to paint your ceiling, it’s vital that you do the job right. It’s a tough job, but it can also add value to your home and make your rooms look bigger or cozier depending on the paint you use.
Getting the Perfect Ceiling Color

When choosing paint for a ceiling, it’s important to consider the texture of your ceiling. Smooth ceilings are easier to paint than rough-textured ceilings. You may have a difficult time painting right next to a textured ceiling; it’s impossible to brush a crisp line of paint without getting it on the ceiling. Luckily, there’s a solution for this problem: Knock off the texture at the edge with a putty knife before you start. This will allow your brush bristles to slide into the groove, giving you a clean paint line without any paint showing up on the ceiling.
Using a Grid-Like Sections for Cutting and Rolling

When painting ceilings, it’s best to work in grid-like sections of 3 square feet to 5 square feet. This way you can keep edges from drying out as you work and you can easily see if the paint is going on correctly.
Step 1: Remove Furniture

If you’re painting a vaulted or angled ceiling, it’s important to remove any furniture that might be in the way. You can also cover large items like dining tables, desks and chairs with drop cloths to protect them from paint spills and drips.
STEP 2: Mask Tops of Walls and Crown Molding With Tape

If your walls are not already painted, apply painter’s tape along the tops of them. It’s a good idea to also tape around any moldings that decorate the ceiling’s edges.
STEP 3: Prepare a Ladder

When painting a ceiling, it’s critical to use a ladder of the appropriate height for the ceiling painting toronto room. Straining to reach the ceiling can be painful and cause sore muscles the following day, so make sure you have a ladder that’s easy to climb.
STEP 4: Cut In and Roll

When cutting in a ceiling, use a 2- to 3-inch brush. Starting at the edge of the ceiling, paint into the area a few inches. This will blend in with the rest of the ceiling, and it’s a better option than trying to brush in the entire space at once.

Then, using a roller, roll the paint in the same grid-like section that you just painted. Repeat this process until you’ve covered the whole ceiling.
STEP 5: Let Dry for 30 Minutes

When the ceiling is completely dry, you’ll need to clean the brushes, roller and paint tray. Wash the brushes and roller in warm soapy water using a paint brush comb and a painter’s tool with a notch for cleaning your roller.

Once the brushes and roller are clean, you can reassemble them to begin painting again. You can also carry them to a garage sink or large tub for washing.